Products in this category
    • economie
From US$ 102.00

Programmer

Better heating, for better economies

The Programmer system module enables managing the heating levels of each heater (to a maximum of 20 heaters), based on a chosen program and established schedule. It’s the ideal system for those seeking to control heating of the entire home, while maximizing their economies.

To know more about the Programmer

A programing example

Program an automatic lowering of the temperature by 5°F when you aren’t home, or when you’re sleeping, and an increase in temperature to 68°F when you return home, or 60 minutes prior to waking up. The possibilities are almost infinite.


At your fingertips

The Programer system module can be inserted directly into the socket on the heater, beside the thermostat. For heaters without a socket, connection to the Programer is done through the pilot wire (a pre-installed wire on all heaters, except on 120V units and commercial heaters).

Varied solutions

With the Programer, you have the choice of 7 pre-selected programs, or a custom program, organized hourly, in Comfort or Economy mode (different for each day of the week), or in Frost protection mode, for prolonged absences.

Worry free

The Programer system module operates without a battery, and can be programed directly on the heater, or outside the module socket. In cases of power outages, the heating schedule remains programed. Only the date and time need to be reset afterwards.

Convectair warranty

2 Years against all manufacturing defects.

Programmer

Technical informations

Operation

Can be programmed after 15 minutes of full charging in a heater connected to a power source.

No batteries required.

May be programmed directly on the heater or removed form the socket. The Programmer module becomes operational once it is reinserted in its outlet.

May be locked in the heater outlet.


LCD Display

Continuously displays current time, day, heating mode (Comfort, Economy or Frost Protection), daily program and hourly status; displays hour, day and program while settings are being entered.


Programming

Choice of 7 pre-selected programs or a customized hour-by-hour Comfort or Economy program for each day of the week and a Frost protection mode.
The Programmer module lets you override current program centrally or individually for each heater.
Simple, easy programming instructions are found directly on the Programmer module. 
In case of power failure, the Programmer module will keep its charge for 10 hours. Beyond that, only the time and day must be reset. All pre-selected and custom programs are saved indefinitely.


Wiring (FP)

For single-heater programming: install the Convectair unit using a standard 2-conductor cable. 

7392 FP: Programmable pilot-wire module. Each module can control scheduled temperature variations up to 20 compatible heating units. 
Wiring requirements: 3-conductor cable that can serve as a communication wire from the module to the units.
Remote units that can receive FP signals: All Convectair units, with the exception of Soprano (7808) and 120V models. 

Master units compatible with FP, ECP or RCP modules: Allegro II (#7315,7316, 7317) and Allegro (#7302,7303,7304). 

Note : Any heater equiped with a RCP module can in turn relay a FP signal to other remote units (contact us for more information.


Wiring (CP)

7392 ECP and RCP : Programmable powerline carrier unit consisting of a transmitter module (ECP) and a receiver module (RCP). Each ECP module can control scheduled temperature variations up to 20 heating units equipped with receiver modules (RCP). Maximum of 3 ECP modules per home (3 heating zones).  No special wiring required. 

Master units compatible with FP, ECP or RCP modules: Allegro II (#7315,7316, 7317) and Allegro (#7302,7303,7304). 


Note : Any heater equiped with a RCP module can in turn relay a FP signal to other remote units (contact us for more information.


Dimensions

Product 240v Watts
BTU/h
208v Watts
BTU/h
120v Watts
BTU/h
Width cm
in
Height cm
in
Depth cm
in
Color
ECP 7392-ECP N/A N/A N/A 4.5
13/4
6
23/8
14.5
511/16
Greige
FP 7392-FP N/A N/A N/A 4.5
13/4
6
23/8
14.5
511/16
White
RCP 7392-RCP N/A N/A N/A 4.5
13/4
6
23/8
14.5
511/16
Greige

Select the required wattage Programmer

Select a colour

Where can I find an installer ? Browse through our list of distributors and recommended installers

Where can I find an installer ?

Need help? Browse our FAQ or contact us directly

FAQ Contact

In order to save your calculations, your warranty registration and to manage your subscription to our newsletter, please sign in or create an account.

Create an account

Congratulations!

You are now logged in! Refresh the page to see it in action

Log in

Forgot your password?

Please enter your email address below. You will receive a link to reset your password.

Please check your email

A password reset link was sent to your email

Error

There is no account associated with that email

Try another email

Reset your password

Enter your new password below

Thank you

Your password has been changed.

Error

The password could not be changed. Please contact an administrator.

Please, confim your email address

Subscribe to our newsletter

Congratulations!

You have been registered to the newsletter

Error!

An error has occured. Please try again later.

Congratulations!

You have been removed from the newsletter.

Error!

You must confirm your email address first. Please check your email.