The Opera 12 features innovative functions for saving energy. Such functions, combined with its radiant heating technology, make the Opera 12 the ideal radiant wall heater for those seeking beautiful, smart and economical heating.
Offered in 750 & 1000W.
Only offered in satin white.
Note:Due to recent changes on its design, the new Opera is no longer compatible with the Programmer.
Only units with a manufacturing date of 41/18 (week # 41-2018) or previous are compatible with the Programmer.
Please always make sure your Convectair heater is compatible before purchasing a Programmer.
Available in wattages of 750 or 1000W, the Opera 12 heats while creating the sensation of soothing warmth, like the effect of the sun’s rays. Its soft enveloping warmth is diffused throughout the room. A choice you won’t regret.
The exteriors of our radiant heaters are designed to diffuse heat in the best way possible. The Opera 12 therefore features a honeycombed exterior, enabling the heating element to better diffuse heat throughout the room. Modern in design, the exterior contains an absence detector, a very useful tool for economizing energy.
Thanks to the Opera 12’s electronic back-lit thermostat, which is ultraprecise to 1/10°C, and its thermal sensor, located 6 in. from the floor to detect the coldest air, you will enjoy in a stable, precise and consistent environment.
The Opera 12 is endowed with many smart functions, such as an absence detector, which gradually and economically lowers heating when it no longer detects human activity in the room.
The open-window function, another smart function, stops the heater as soon as it perceives a sudden draft of cold air, to avoid any wasted energy.
Finally, the Opera 12 features a smart thermostat with many programmable functions, for better comfort and energy economies.
• 2 Years against all manufacturing defects.
• 5 Years on heating elements.
For reliable and guaranteed installation, Convectair recommends consulting a certified electrician. For a listing of electricians recommended by Convectair, consult the “Where to buy” section.
The Opera12 is designed to be as safe as possible. Its corners are rounded and heating elements inaccessible to children’s fingers. The lockable thermostat is endowed with thermal protection in cases of overheating.
The Opera 12 is available in 750 and 1000W. Calculating the wattage of your heating needs is essential. Making the right choice will bring you optimal comfort. To determine the necessary wattage, go to the “Wattage calculator” section.
Convectair is proud to announce that its Opera 17 and Opera 12 units received the first prize for new products in the " Residential or commercial applications electrical products" category at MCEE trade show, held in Montreal last April.
Total capacity : 750 or 1 000 W
Radiant heat : Ribbed-high-emissivity monoblock element made of aluminum alloy.
Thermal protection : Automatic reset overheat protection.
Electronic thermostat : Built-in electronic proportional-action thermostat ultraprecise to 1/5ºF (1/10ºC ).
Programmer : Control panel designed to accept the 7392 Programmer module.
Location : On top right-hand side of the unit, with lockable protective cover.
Energy use indicator.
LCD screen with digital controls lockable by key combination.
On/Off button with indicator light.
Mode button with five settings: Comfort; Economy; Frost protection (45°F (7°C)); Program (automatic setback when connected to the Convectair Programmer); Absence detector (setback when absence detected).
Open-window button to activate open-window detection.
Ideal °C button : optimizes energy consumption and restores default settings.
« + and - » buttons : set the temperature and lock the controls.
Heating indicator light.
Steel construction with polyester/epoxy anti-rust powder coating and resistant to UV rays.
Cabinet : Convex casing with rounded corners.
Grille : Perforated front panel for better radiant heat with absence detector.
Colour : FS = Satin white
Recommended Installation height : 6 in. (15 cm).
Clearances : Front: 30 in. (75 cm) - Sides: 8 in. (20 cm) - Above: 8 in. (20 cm) - Bottom: 1 in. (2.5 cm)
Installation : Quick-mounted surface installation with easy snap-on bracket that also serves as marking template.
Connection : 240-V unit: Flexible cord connection, including junction box cover. Installation requires 2 in. X 3 in. wall box (not included).
Note : 3-conductor cable or 2-conductor cable with a third wire should be used if unit is to be linked with the Convectair Programmer module (7392 FP).
| Product |
240v
Watts BTU/h |
208v
Watts BTU/h |
120v
Watts BTU/h |
Width
cm in |
Height
cm in |
Depth
cm in |
Color |
|---|---|---|---|---|---|---|---|
| C07 7732-C07-FS |
750 2559 |
565 1927 |
N/A |
105.7 415/8 |
28.3 111/8 |
10.5 41/8 |
Satin White |
| C10 7731-C10-FS |
1000 3412 |
750 2559 |
N/A |
106 413/4 |
28.4 113/16 |
9.9 37/8 |
Satin White |
In order to save your calculations, your warranty registration and to manage your subscription to our newsletter, please sign in or create an account.
You are now logged in! Refresh the page to see it in action
A password reset link was sent to your email
There is no account associated with that email
Try another emailYour password has been changed.
The password could not be changed. Please contact an administrator.
You have been registered to the newsletter
An error has occured. Please try again later.
You have been removed from the newsletter.
You must confirm your email address first. Please check your email.
