The Soprano is the only fan-forced heater that can be installed high up on the wall. It’s ideal for those without much space, but seeking comfort in the room. A signature Convectair solution that measures up to your expectations!
Also available in 120V.
Total capacity : 1500W
Only offered in white.
50$ rebate on this product!
Click here to receive it !
The Soprano is endowed with 750 or 1500W fan-forced heating, depending on the installation. It can be linked to a wall thermostat or timer, depending on your needs. In its discreet way (with its small size), this heater is perfect for restricted or awkward spaces, such as bathrooms and shower rooms.
Thanks to its high positioning on the wall, the Soprano’s fan-forced heater directs air towards the centre of the room, via a forward-louvered air outlet on the bottom of the heater, for consistent comfort throughout the room.
For reliable and guaranteed installation, Convectair recommends consulting a certified electrician. For a listing of electricians recommended by Convectair, consult the “Where to buy” section.
The Soprano
is designed with a splash-proof construction, and heating element that is
inaccessible to children’s fingers. For
installations, it is recommended to follow the Building Code, and respect
minimum distance requirements between heaters and water sources.
Total capacity : 750 or 1500 W
Fan-forced heat : Low-thermal-mass heating element combined with low-pressure tangential blower.
Thermal protection : Resetable overheat protection. Reset by turning heater off.
Not included.
The installation of a 30-60-minute timer or thermostat that is suited to the installation voltage, is recommended.
Steel construction with polyester/epoxy anti-rust powder coating and resistant to UV rays.
Cabinet : Splash-proof construction with rounded edges. Bracket provides access to the back without dismounting the unit, for easy maintenance.
Louvres : Bottom grille directs the hot air downwards, towards the center of the room to ensure even temperature.
Colour : BB = White
Installation height : 6 feet (1.8 m).
Clearances : Front: 20 in (50 cm) - Sides: 4 in (10 cm) - Above: 4 in (10 cm) - Below : 20 in (50 cm)
Installation : Quick-mounted surface installation with easy snap-on bracket.
Connection : Flexible cord connection, including junction box cover. Installation requires a wall box (not included) and a timer (not included) or a thermostat (not included) that is suited to the installation voltage.
Note : Wattage can be selected at time of installation: 750 or 1500 W.
| Product |
240v
Watts BTU/h |
208v
Watts BTU/h |
120v
Watts BTU/h |
Width
cm in |
Height
cm in |
Depth
cm in |
Color |
|---|---|---|---|---|---|---|---|
| C15 7808-C15-BB |
750/1500 2559/5118 |
N/A | N/A |
34.3 131/2 |
23 91/16 |
14 51/2 |
White |
In order to save your calculations, your warranty registration and to manage your subscription to our newsletter, please sign in or create an account.
You are now logged in! Refresh the page to see it in action
A password reset link was sent to your email
There is no account associated with that email
Try another emailYour password has been changed.
The password could not be changed. Please contact an administrator.
You have been registered to the newsletter
An error has occured. Please try again later.
You have been removed from the newsletter.
You must confirm your email address first. Please check your email.
