• 240v
    • convection
    • silencieuse
    • soufflant
    • economie
    • immediat

Samba II

Flush-mount, fan-forced & natural convection…all in one!

Ideal for entrances, the Samba ll is a natural convection heater with a fan-forced component that becomes activated when a gust of cold air is felt, or if you activate the timer. This powerful heater offers quick heat diffusion, and is often found in bathrooms, where it can heat up the space in a matter of minutes. Total capacity of 2000W.
Only available in white.
Compatible with the Programmer.

To know more about the Samba II

Two-tier comfort

The Samba operates with an initial natural convection wattage of 1000W, for stable and continuous comfort. When a more pressing need for warmth arises, the Samba’s timer activates its powerful fan, located at the bottom of the heater, to add 1000W of intense heat (on demand), for a total of 2000W.

Its precision

Thanks to its electronic thermostat, which is ultraprecise to 1/10°C, the Samba II ensures that the desired temperature is maintained, without even the slightest variation. A variation of 3°C (5°F) automatically activates the quick heat option to maintain your degree of comfort. You will therefore be able to offer a consistent environment, without having to adjust the thermostat, regardless of exterior temperature fluctuations.

Convectair warranty

•    2 Years against all manufacturing defects
•    5 Years on heating elements

For reliable and guaranteed installation, Convectair recommends consulting a certified electrician. For a listing of electricians recommended by Convectair, consult the “Store locator” section.

Bathroom safety

The Samba II is designed with a splash-proof construction, and heating element that is inaccessible to children’s fingers. Its thermostat is lockable and endowed with thermal protection in cases of overheating.
Your heater must be installed in accordance with national and local codes and respect minimum distance requirements between heaters and water sources.

Planning your comfort

Looking for a heater that automatically heats up the bathroom prior to your arrival in the morning? The Samba II enables you to do exactly that, thanks to its various programming options.
Samba II

Technical informations

Heating element

Total capacity : 2000 W

Convection (1000 W) : X-shaped, monoblock element made of surface-treated extruded aluminum.

Fan-forced heat on demand (1000 W) : Low-thermal-mass heating element combined with low-pressure tangential blower.

Thermal protection : - Convection:  Automatic reset overheat protection.
                                       - Fan-forced heat : with resettable overheat protection, activated by interrupting the power supply.

Temperature control

Electronic thermostat : with backlit LCD display. Built-in 2-stage electronic proportional-action thermostat ultraprecise
to 1/5ºF (1/10ºC ) for convection heating.
A drop of 5ºF (3ºC) in room temperature will automatically start the quick fan-forced heat option.

: 5-90 minute resetable electronic timer for quick heating.

: Programmer-compatible, pilot wire only.

Control panel

Select unit of temperature in °C or °F by key combination.

Front panel.

LCD screen
: Back-lit with controls lockable by key combination.

On/Off button
with light indicator.

Timer button
with light indicator.

24-hr button
with light indicator stores the Chrono setting, for daily bathroom preheating.

« + and - » buttons
control the temperature setting.

Locked light indicator.

Heating light indicator.


Steel construction with polyester/epoxy anti-rust powder coating and resistant to UV rays.

: Thin profile splash-proof construction with rounded edges for a safe installation in the bathroom.

: Front-louvered air outlet that hides the unit interior and directs heat towards the centre of the room.

: BB = White


Recommanded Installation height :   12 in. (30 cm).

Clearances : Front: 24 in. (60 cm)  - Sides: 4 in. (10 cm)  - Above: 20 in. (50 cm) - Underneath: 4 in. (10 cm).

: Built into the wall between studs (minimum distance: 13 1/4 in (33 cm) centre).

Depth required: 3 1/2 in (9 cm) including wall surface.

Connection 240V unit: Direct connection through bottom of the unit. Removable front panel; installation and wiring through the front.

Note : 3-conductor cable or 2-conductor cable with a third wire should be used if unit is to be linked with the Convectair Programmer module (7392 FP).


Product 240v Watts
208v Watts
120v Watts
Width cm
Height cm
Depth cm
Samba II 7837-C20-BB 1000/2000
N/A N/A 39

Select the required wattage or model Samba II

Find the right power for optimal comfort The power calculator helps you determine the power you need

Wattage Calculator

Where can I find an installer ? Browse through our list of distributors and recommended installers

Where can I find an installer ?

Need help? Browse our FAQ or contact us directly

FAQ Contact

In order to save your calculations, your warranty registration and to manage your subscription to our newsletter, please sign in or create an account.

Create an account

  • Reload captcha
  • Congratulations!

    You are now logged in! Refresh the page to see it in action

    Log in

    Forgot your password?

    Please enter your email address below. You will receive a link to reset your password.

    Please check your email

    A password reset link was sent to your email


    There is no account associated with that email

    Try another email

    Reset your password

    Enter your new password below

    Thank you

    Your password has been changed.


    The password could not be changed. Please contact an administrator.

    Please, confim your email address

    Subscribe to our newsletter


    You have been registered to the newsletter


    An error has occured. Please try again later.


    You have been removed from the newsletter.


    You must confirm your email address first. Please check your email.