Piccolo

Installation Built into the wall between studs. Clear a regular opening of 14 5/8 in. (37.2 cm) high ; 12 3/8 in. (31.5 cm) wide. Depth required: 3 3/8 in. (8.6 cm).

Connection 240v, with direct connection in the unit - top left. Removable front panel; installation and wiring through the front.

Installation height 12" (30 cm).

Clearances
Front: 24" (60 cm) Sides: 4" (10 cm) Above: 8" (20 cm).

Notes Visible thickness: 1" (2.2 cm); total thickness: 4 3/8" (10.8 cm).

Total capacity (1500 W)
Fan-forced heat (750 W) Low-thermal-mass heating element combined with low-pressure tangential blower (squirrel cage).
Quick heat option(1500 W) Low-thermal-mass heating element combined with low-pressure tangential blower (squirrel cage).

Thermal protection Reset overheat protection by turning heater off.

Electronic thermostat Built-in electronic proportional-action thermostat for basic heating.

Timer 30 minute electronic timer for on demand heating.

Programmer Programmer-compatible, pilot wire only. 3-conductor cable or 2-conductor cable plus a third wire should be used if units is to be linked with the Convectair Programmer module (7392 FP).

Location Located in front of the unit.

Switch On / Off switch, also serves as reset for overheat protection.

Timer Activates / Desactivates on demand heating (30 minute or less).

Dial Electronic thermostat control.

Indicator light 1 On / Off.
Indicator light 2 Timer.
Indicator light 3 Heating.

Steel construction Gage 20, with polyester/epoxy anti-rust powder coating.

Cabinet Thin profile construction with rounded edges.

Louvers Air outlet hides the unit interior and directs heat towards the center of the room.

Colour BB = White

Power on demand
Fan-forced models are generally smaller and heat quickly by means of a stronger airflow. The low-thermal-mass heating element directs all the power into a small space. The heat from the element is directly transferred to the fan-driven air. Activated by a timer, these fan units supply heat only when you truly need it or request it.

A Convectair maintains the selected temperature without allowing major fluctuations. Thanks to the electronic thermostat, sensitive to within 1/10 °C (1/5 °F), the room’s occupants can go about their business for as long as they like, in a steadily warm environment without fiddling with the thermostat, oblivious to changes in the outside temperature.

Keeping pace with the household
The only fluctuations allowed are the ones you program to match your household’s pace. By programming a heating schedule for each room, you can save considerable energy. Regularly lowering the temperature by 4 °C over a period of four or more hours can save 15% in heating costs, so every single heating period can make a difference. Temperature setbacks can take place when the house is empty or during the night, when a cooler temperature makes for a good night’s sleep.

An example of good programming
During the night, the temperature throughout the house is 16°C. At the planned wake-up hour, the program implements a scheduled 4 °C increase in all the rooms connected to the programmer. When everyone leaves for school or work, the same Convectairs slow down, and the temperature drops by 4 °C again. Half an hour before the first key turns in the lock at the end of the day, the heating rises once more.
To divide a house into several zones that follow different heating schedules, you simply need a programmer per zone: one for the bedrooms, and another for the living areas, for example. At Convectair, we want you to be comfortable without wasting energy.

when you purchase or install a heater in a home, you should establish a heat distribution plan to evaluate the heating requirement of each room or area of the home. Installing heat sources at several strategic points prevents the overheating of one single unit as it tries to keep up with demand for the whole room. When the heaters are placed at the right spots around the room, the result is maximum comfort and complete safety.

Would you like us to plan your ideal heating plan? Contact the team of Convectair experts. This service is free, and it could save you a bundle!
1 800 463-6478 / support@convectair.ca

Do a heat loss calculation on-line now!

The bathroom is the one room where a lot of heat is needed for a short time only. That's why all our models for the bathroom— Diva, Impresario 1200, Impresario 1600, Jazz, Piccolo,Samba, Calypso and Soprano—are equipped with a powerful fan that can heat up the room almost instantly.

Convectairs for the bathroom are designed to withstand splashes. The bigger models feature a control panel that is easy to access but safely out of children’s reach. The smaller units and the convection heaters have a panel that can be made tamper-proof. And all the fans (except the one of the Soprano) operate on a timer, so that the heater can’t be left on by mistake.

Convectair heating units meet Canadian and American safety standards . In addition, their designs are based on the more stringent performance standards applied in Europe.

• 2 years against all defects
• 5 years on heating elements

Once the guarantee expires, the Convectair technical team is a reliable source of advice and service. Many years after purchase, most Convectair unit can be repaired and refurbished.

Consult here a list of our authorized Service Centers

For a reliable and guaranteed installation, we recommend that all units be installed by a licensed electrical contractor.

Customers satifaction is our first priority.
That is why our Customer Service team
is always available to answer all of your questions even if it's before, during or after purchase!

To reach us easily and quickly :

Telephone: (450)433-5701
Toll-free line: 1-800-463-6478

email : support@convectair.ca

Fax : (450) 434-3166
Toll-free : 1-877-434-3166